The Nernst N2032-02/CO oxygen content and combustible gas two-component analyzer is a comprehensive analyzer thatcan simultaneously detect oxygen content, carbon monoxide and combustion efficiency in the combustion process.It canmonitor the oxygen content and carbon monoxide content in the flue gas during or after the combustion of boilers, furnaces.and kilns.The analvzer mate with Nernst 0/CO probe can measure the oxvgen content percentage 0% in the flue andfurnace. the PPM value of carbon monoxide CO. the value of 12 combustible gases and the combustion efficiency of thecombustion furnace in real time....

The Nernst N6000 oxygen analyzer can be widely used in the detection of oxygen content in the combustion process of electric power,metallurgy, steel, chemical industry, ceramics, incineration and other industries. It can directly monitor the oxygen content in the flue gas during or after combustion of boilers, kilns, sintering furnaces, heating furnaces, pit annealing furnaces, etc.  During the measurement, the temperature in the furnace and the flue can range from normal temperature to 1400°C. The analyzer provides real-time oxygen content O2% (percent) parameters and oxygen potential millivolt values in the furnace or flue....

The Nernst N2001 oxygen analyzer can be widely used in the detection of oxygen content in the combustion process of electric power,metallurgy, steel, chemical industry, ceramics, incineration and other industries. It can directly monitor the oxygen content in the flue gas during or after combustion of boilers, kilns, sintering furnaces, heating furnaces, pit annealing furnaces, etc.  During the measurement, the temperature in the furnace and the flue can range from normal temperature to 1400°C. The analyzer provides real-time oxygen content O2% (percent) parameters and oxygen potential millivolt values in the furnace or flue....

The Nernst Heated and Non-Heated probes are highly accurate, and have minimal drift (±1%).The Nernst in-situ probes are highly durable; choose the Nernst Heated probe for analysing gases with temperatures below 900ºC and the Nernst Non-Heated probe for temperatures 700°C to 1400°C....

he NOVATECH 1231/1232 zirconia probe (oxygen sensor) adopts the latest patented technology in the world, and applies the welding technology of zirconia sheets and steel jade tubes to ensure that the physical properties of zirconia sheets and steel jade tubes are consistent, achieving a consistent thermal expansion coefficient. Explosion will not occur under extremely cold and extremely hot environmental conditions....

The NOVATECH 1231 zirconia probe (oxygen sensor) adopts the world's latest patented technology and applies the welding technology of zirconia sheets and steel jade tubes to ensure that the physical properties of zirconia sheets and steel jade tubes are consistent, achieving a consistent thermal expansion coefficient. Explosion will not occur under extremely cold and extremely hot environmental conditions. The probe has high measurement accuracy, no drift, fast reaction speed, strong thermal shock resistance, good corrosion resistance, and can be used normally in high water vapor and dust environments without specific calibration. The oxygen millivolt signal is consistent with the energy potential law curve, and the probe can withstand temperatures up to 1400 ℃, with a long service life of over 5 years. The cost of use and maintenance is low, and each component of the probe can be independently replaced....

NOVATECH 1231 wear-resistant zirconia probe (oxygen sensor) adopts the latest patented technology in the world. It can be directly inserted into the required measurement work area in high dust, corrosive atmosphere, and high humidity environments, with a measurement accuracy of up to 10-30. The probe has a fast reaction speed, a reaction time of less than 100 milliseconds, strong corrosion resistance, and strong wear resistance....

The 2000-SX oxygen analyzer can be widely used for the detection of oxygen content in combustion processes in various industries such as power, metallurgy, steel, chemical industry, pottery making, incineration, etc. It can directly monitor the oxygen content in the flue gas during or after combustion in boilers, kilns, sintering furnaces, heating furnaces, well annealing furnaces, etc. During measurement, the temperature inside the furnace and flue can range from room temperature to 1200 ℃ with multiple degrees of high temperature. The analyzer provides real-time oxygen content O2% (percentage) parameters and oxygen potential millivolts in the furnace or flue....